Using ser2net on GL.iNet's mini-routers
Installation
opkg update
opkg install ser2net
Configuration
Configuring ser2net
You should edit the file /etc/config/ser2net look like:
config proxy
option enabled 1
option port 5002
option protocol raw
option timeout 0
option device '/dev/ttyATH0'
option baudrate 115200
option databits 8
option parity 'none'
option stopbits 1
protocol: It supports raw, telnet device: The serial device, it usually is /dev/ttyS0, but for ar9331, it should be /dev/ttyATH0
Disable Debug Console
If the router only has one UART, you have to comment out ::askconsole:/bin/ash --login in /etc/inittab to disable debug console, so that you can use it to communicate with other.
::sysinit:/etc/init.d/rcS S boot
::shutdown:/etc/init.d/rcS K shutdown
# ::askconsole:/bin/ash --login
Start ser2net
Reboot the unit now.
reboot
Last updated
Was this helpful?